Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:manuals:service-notes-for-mitail [2026/05/09 18:08] – [Installing Batteries] darkgrueen:manuals:service-notes-for-mitail [2026/06/01 14:57] (current) – [Case Replacement] darkgrue
Line 23: Line 23:
  
 <WRAP round tip 90%> <WRAP round tip 90%>
-Before starting, read all the sections of this guide. Take photos or videos of your disassembly, to assist you in reassembling the tail. The sections that most users have are in the area of setting the servo home position, reassembling the control board to the case, and reassembling the case halves. Tips have been provided for each of those trouble areas.</WRAP>+Before starting, read all the sections of this guide. Take photos or videos of your disassembly, to assist you in reassembling the tail. The sections that most users have trouble in are in the area of setting the servo home position, reassembling the control board to the case, and reassembling the case halves. Tips have been provided for each of those trouble areas.</WRAP>
  
 This requires that the case be opened, the two batteries taken out of the case (they may stay attached to the control board), the control board removed from the case half, the four servo frame mount screws be removed to free both servos and the tail spine from the case half, and the servo pulley be removed from the servo (one screw in the center). The cable must be removed from the pulley (requiring 7 screws removed from the pulley) to remove the case half from the cable. This requires that the case be opened, the two batteries taken out of the case (they may stay attached to the control board), the control board removed from the case half, the four servo frame mount screws be removed to free both servos and the tail spine from the case half, and the servo pulley be removed from the servo (one screw in the center). The cable must be removed from the pulley (requiring 7 screws removed from the pulley) to remove the case half from the cable.