Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:dev:tailcontrol-move-reference [2026/07/04 19:45] – [RGB LED Commands] darkgrueen:dev:tailcontrol-move-reference [2026/08/03 19:18] (current) – darkgrue
Line 42: Line 42:
 | **TAILS2** | Slow left ear, pause, home | | **TAILS2** | Slow left ear, pause, home |
 | **TAILS3** | Slow right ear, pause, home | | **TAILS3** | Slow right ear, pause, home |
-| **TAILFA** | Mapped to left tilt and listen bang left | +| **TAILFA** | Mapped to left tilt and listen bang left; both ears point left in sequence | 
-| **TAILSH** | Mapped to right tilt and listen bang right |+| **TAILSH** | Mapped to right tilt and listen bang right; both ears point right in sequence |
 | **TAILHA** | Mapped to tilt backwards; both ears turn outwards quickly, pause, home | | **TAILHA** | Mapped to tilt backwards; both ears turn outwards quickly, pause, home |
 | **TAILER** | Hewo! Right twist, pause, left twist | | **TAILER** | Hewo! Right twist, pause, left twist |
 | **TAILEP** | Double right ear twist, home | | **TAILEP** | Double right ear twist, home |
-| **TAILT1** | Flick left ear | +| **TAILT1** | Double fast flick left ear | 
-| **TAILT2** | Flick right ear |+| **TAILT2** | Double fast flick right ear |
 | **TAILET** | Double left ear twist, home | | **TAILET** | Double left ear twist, home |
 | **TAILU1** | **U**ser defined **1** | | **TAILU1** | **U**ser defined **1** |
Line 134: Line 134:
 ===== RGB LED Commands ===== ===== RGB LED Commands =====
  
-====== TailControl Move Reference ====== +All **RGB**''xxx'' pattern commands below (except **RGBOFF**), accept an optional trailing **brightness** parameter, an integer from ''0'' to ''100'' representing the overall brightness of the string in percent (e.g., ''RGBRBW 50''). If omitted, brightness defaults to ''currConfig.defaultRGBBrightness'' (100%).
- +
-Move list for the Tail Company TailControl firmware. TailControl is the unified firmware platform (version 5.//x//.//x// and higher) for the EarGear 2, FlutterWings, MiTail, MiTail Mini, and Paws with Claws (ClawGear); and covers the shared features that exist across all those devices. +
- +
-All commands are case-sensitive. Trailing whitespace (e.g., `NULL`, `CR`, etc.) are ignored. The space between a command keyword and the parameters is mandatory. +
- +
-Move commands return ''<movename> BEGIN'' upon start, and '' <movename> END'' upon completion. If the move is set to return home after completion (all firmware moves are), then it will be immediately followed by a ''TAILHM BEGIN'' and a ''TAILHM END'' as well. +
- +
-A command will return ''LOWBATT'' and reject the command if the battery is less than 10%. ''ERR'' will be returned if the command can't be parsed or otherwise executed. +
- +
-A new command that is received before the currently executing command is finished will immediately end the current command and start the new one. +
- +
-<WRAP round todo 90%> +
-**IMPORTANT NOTICE:** TailControl and the TailControl Protocol is still under development. Some commands and features described here relate to a future release and are subject to change at this time. +
-</WRAP> +
- +
- +
-===== Paws with Claws (ClawGear) ===== +
- +
-| **TAILHM** | **H**o**M**e position | +
-| **TAILS1** | Full extend slow | +
-| **TAILS2** | Full extend fast | +
-| **TAILS3** | Half extend slow | +
-| **TAILFA** | Half extend fast | +
-| **TAILSH** | Full retract slow | +
-| **TAILHA** | Full retract fast | +
-| **TAILER** | RAWR! Full extend fast, pause, retract very slow | +
-| **TAILEP** | No move | +
-| **TAILT1** | No move | +
-| **TAILT2** | No move | +
-| **TAILET** | No move | +
-| **TAILU1** | **U**ser defined **1** | +
-| **TAILU2** | **U**ser defined **2** | +
-| **TAILU3** | **U**ser defined **3** | +
-| **TAILU4** | **U**ser defined **4** | +
- +
- +
-===== EarGear 2 ===== +
- +
-| **TAILHM** | **H**o**M**e position | +
-| **TAILS1** | Mapped to tilt forward; both ears turn inwards slowly, pause, home | +
-| **TAILS2** | Slow left ear, pause, home | +
-| **TAILS3** | Slow right ear, pause, home | +
-| **TAILFA** | Mapped to left tilt and listen bang left | +
-| **TAILSH** | Mapped to right tilt and listen bang right | +
-| **TAILHA** | Mapped to tilt backwards; both ears turn outwards quickly, pause, home | +
-| **TAILER** | Hewo! Right twist, pause, left twist | +
-| **TAILEP** | Double right ear twist, home | +
-| **TAILT1** | Flick left ear | +
-| **TAILT2** | Flick right ear | +
-| **TAILET** | Double left ear twist, home | +
-| **TAILU1** | **U**ser defined **1** | +
-| **TAILU2** | **U**ser defined **2** | +
-| **TAILU3** | **U**ser defined **3** | +
-| **TAILU4** | **U**ser defined **4** | +
- +
- +
-===== FlutterWings ===== +
- +
-| **TAILHM** | **H**o**M**e position | +
-| **TAILS1** | **S**low full flap | +
-| **TAILS2** | **S**low half flap | +
-| **TAILS3** | **S**low high half flap | +
-| **TAILFA** | **FA**st full flap | +
-| **TAILSH** | Fast low half flap | +
-| **TAILHA** | Slow rousing | +
-| **TAILER** | Wings **ER**ect, pause, and back | +
-| **TAILEP** | Fast low half flap | +
-| **TAILT1** | Right, left, home | +
-| **TAILT2** | Wings erect, then home by halves | +
-| **TAILET** | Fast high half flap | +
-| **TAILU1** | **U**ser defined **1** | +
-| **TAILU2** | **U**ser defined **2** | +
-| **TAILU3** | **U**ser defined **3** | +
-| **TAILU4** | **U**ser defined **4** | +
- +
- +
-===== Glow Tip LED Patterns ===== +
- +
-| **LEDOFF** | **LED**s **OFF** | +
-| **LEDREC** | **REC**tangle wave pattern (blink 1 second on, 1 second off) | +
-| **LEDTRI** | **TRI**angle wave pattern (fade in 1 second, fade out 1 second) | +
-| **LEDSAW** | **SAW**tooth wave pattern (fade in 2 seconds, off) | +
-| **LEDSOS** | Morse **SOS** pattern | +
-| **LEDBEA** | **BEA**con (100ms on every 2 seconds) | +
-| **LEDFLA** | **FLA**me | +
-| **LEDSTR** | **STR**obe | +
-| **LEDUS1** | **US**er defined **1** | +
-| **LEDUS2** | **US**er defined **2** | +
-| **LEDUS3** | **US**er defined **3** | +
-| **LEDUS4** | **US**er defined **4** | +
- +
- +
-===== MiTail ===== +
- +
-| **TAILHM** | **H**o**M**e position | +
-| **TAILS1** | **S**low wag **1** | +
-| **TAILS2** | **S**low wag **2** | +
-| **TAILS3** | **S**low wag **3** | +
-| **TAILFA** | **FA**st wag | +
-| **TAILSH** | **SH**ort wag | +
-| **TAILHA** | **HA**ppy wag | +
-| **TAILER** | **ER**ect | +
-| **TAILEP** | **E**rect **P**ulse | +
-| **TAILT1** | **T**remble **1** | +
-| **TAILT2** | **T**remble **2** | +
-| **TAILET** | **E**rect **T**rem | +
-| **TAILU1** | **U**ser defined **1** | +
-| **TAILU2** | **U**ser defined **2** | +
-| **TAILU3** | **U**ser defined **3** | +
-| **TAILU4** | **U**ser defined **4** | +
- +
- +
-===== MiTail Mini ===== +
- +
-| **TAILHM** | **H**o**M**e position | +
-| **TAILS1** | **S**low wag **1** | +
-| **TAILS2** | **S**low wag **2** | +
-| **TAILS3** | **S**low wag **3** | +
-| **TAILFA** | **FA**st wag | +
-| **TAILSH** | No move | +
-| **TAILHA** | No move | +
-| **TAILER** | No move | +
-| **TAILEP** | No move | +
-| **TAILT1** | No move | +
-| **TAILT2** | No move | +
-| **TAILET** | No move | +
-| **TAILU1** | **U**ser defined **1** | +
-| **TAILU2** | **U**ser defined **2** | +
-| **TAILU3** | **U**ser defined **3** | +
-| **TAILU4** | **U**ser defined **4** | +
- +
- +
-===== RGB LED Commands ===== +
- +
-All **RGB**''xxx'' pattern commands below (except **RGBOFF**), accept an optional trailing **brightness** parameter, an integer from ''0'' to ''100'' representing the overall brightness of the string in percent (e.g., ''RGBRBW 50''). If omitted, brightness defaults to ''DEFAULT_RGB_BRIGHTNESS'' (100%).+
  
 | **RGBOFF** | **RGB** LEDs **OFF**, returns ''OK'' | | **RGBOFF** | **RGB** LEDs **OFF**, returns ''OK'' |
 +| **RGBBRT** | Set **RGB** **BR**igh**T**ness percentage in NVS and running configuration (e.g., ''RGBBRT 100''), returns ''OK'' |
 | **RGBCHS** | **RGB** **CH**a**S**e; theater marquee chase; optionally takes a hue color (in RGB Hexidecimal, otherwise default #7F7F7F is used) (e.g., ''RGBCHS'' [''7F7F7F''] [''brightness'']), returns ''OK'' | | **RGBCHS** | **RGB** **CH**a**S**e; theater marquee chase; optionally takes a hue color (in RGB Hexidecimal, otherwise default #7F7F7F is used) (e.g., ''RGBCHS'' [''7F7F7F''] [''brightness'']), returns ''OK'' |
 | **RGBCLN** | **RGB** **CY**lo**N**; color dot sweeping back and forth, with fading trails; optionally takes a hue color (in RGB Hexidecimal, otherwise default #FF0000 is used) (e.g., ''RGBCLN'' [''FF0000''] [''brightness'']); returns ''OK'' | | **RGBCLN** | **RGB** **CY**lo**N**; color dot sweeping back and forth, with fading trails; optionally takes a hue color (in RGB Hexidecimal, otherwise default #FF0000 is used) (e.g., ''RGBCLN'' [''FF0000''] [''brightness'']); returns ''OK'' |
Line 283: Line 149:
 | **RGBTWK** | **RGB** **TW**in**K**le; random twinkle effect (e.g., ''RGBTWK'' [''brightness'']), returns ''OK'' | | **RGBTWK** | **RGB** **TW**in**K**le; random twinkle effect (e.g., ''RGBTWK'' [''brightness'']), returns ''OK'' |
 | **RGBWPE** | **RGB** **W**i**PE**; color wipe (e.g., ''RGBWPE'' [''brightness'']), returns ''OK'' | | **RGBWPE** | **RGB** **W**i**PE**; color wipe (e.g., ''RGBWPE'' [''brightness'']), returns ''OK'' |
- 
- 
-== Copyright 2023-2026 © The Mechanical Tail Company Limited contact@thetailcompany.com. All Rights Reserved. == 
- 
  
  
 == Copyright 2023-2026 © The Mechanical Tail Company Limited contact@thetailcompany.com. All Rights Reserved. == == Copyright 2023-2026 © The Mechanical Tail Company Limited contact@thetailcompany.com. All Rights Reserved. ==