Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:manuals:service-notes-for-mitail [2024/10/19 23:25] – darkgrueen:manuals:service-notes-for-mitail [2024/11/11 18:02] (current) – [Introduction] darkgrue
Line 1: Line 1:
 ===== Introduction ===== ===== Introduction =====
  
-These instructions do not purport to cover all details or variations of the product and do not claim to provide for every possible contingency in connection with installation, operation, or maintenance. Self-repairs performed by the customer may lead to damage or loss of your product. Should further information be desired or should particular problems arise which are not covered sufficiently or if repair services are desired, please contact The Tail Company (contact@thetailcompany.com).+These instructions do not purport to cover all details or variations of the product and do not claim to provide for every possible contingency in connection with installation, operation, or maintenance. Self-repairs performed by the customer may lead to damage or loss of your product. Should further information be desired or should particular problems arise which are not covered sufficiently or if repair services are desired, please contact The Tail Company ([[contact@thetailcompany.com]]).
  
 For the purposes of this manual, “left” and “right” references will refer to the MiTail’s orientation when worn on the body, relative to the wearer. So, the “left” side is the side of the MiTail on the wearer’s left. For the purposes of this manual, “left” and “right” references will refer to the MiTail’s orientation when worn on the body, relative to the wearer. So, the “left” side is the side of the MiTail on the wearer’s left.
Line 38: Line 38:
  
 The plugs can be difficult to remove from the board. It’s suggested to pull out and slightly down towards the board (somewhat of a slight rolling motion) helps the plugs release better, instead of pulling straight back. The plugs can be difficult to remove from the board. It’s suggested to pull out and slightly down towards the board (somewhat of a slight rolling motion) helps the plugs release better, instead of pulling straight back.
 +
 +The foam pad faces towards the other battery, but it's not structurally critical. Both batteries are constrained fully in the slots in the ABS case (and care should be taken not to crush the battery ends or wires when closing the case), and won't come in contact with each other or the metal rod around the spine.
  
 <WRAP round important 90%> <WRAP round important 90%>
Line 134: Line 136:
  
 == Copyright 2023-2024 © The Mechanical Tail Company Limited contact@thetailcompany.com. All Rights Reserved. == == Copyright 2023-2024 © The Mechanical Tail Company Limited contact@thetailcompany.com. All Rights Reserved. ==
- 
  
Back to top