Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:dev [2024/03/16 21:10] – darkgrueen:dev [2024/06/28 15:54] (current) – [Current TailCoNTROL Release] darkgrue
Line 2: Line 2:
 ====== Dev Fiesta ====== ====== Dev Fiesta ======
  
-Resources for developers and hackers! Also don't forget about resources like the [[en:manuals:service-notes-for-mitail|Service Notes for MiTail]] in the [[en:manuals|Guides, Patterns, and Safety Info]] section!+Resources for developers and hackers! Also don't forget about resources like the [[en:manuals:service-notes-for-mitail|Service Notes for MiTail]] in the [[en:man_overview|Guides, Patterns, and Safety Info]] section!
  
-==== Command Protocols ====+===== Current TailCoNTROL Release =====
  
-  * [[en:dev:digitail-command-protocol|DIGITAiL Command Protocol]]\\  +The initial release of the new unified firmware, TailCoNTROL is out! MiTail, MiTail Mini, and FlutterWings products can be updated by the CRUMPET app.  
-  * [[en:dev:tailcontrol-command-protocol|TailCoNTROL Command Protocol]]\\  + 
-  * [[en:dev:eargear-v1-protocol|v1 Ear Command Protocol]]\\  +  * The current version of TailCoNTROL is **v5.0.9** 
-  * [[en:dev:eargear-v2-protocol|v2 Ear Command Protocol]]\\ +  * [[en:dev:tailcontrol-release-notes|TailCoNTROL Release Notes]] 
 +  * [[en:dev:tailcontrol-command-protocol|TailCoNTROL Command Protocol]] 
 +  * [[en:dev:tailcontrol-breaking-changes|TailCoNTROL Breaking Changes]] (for app developers) 
 + 
 + 
 + 
 + 
 +==== Legacy Product Command Protocols ==== 
 + 
 +  * [[en:dev:digitail-command-protocol|DIGITAiL Command Protocol]] 
 +  * [[en:dev:eargear-v1-protocol|v1 Ear Command Protocol]] 
 +  * [[en:dev:eargear-v2-protocol|v2 Ear Command Protocol]]
  
  
Line 20: Line 31:
 ==== Using OTA ==== ==== Using OTA ====
  
-If you need to test an experimental firmware or update outside the official CRUMPET app, there is a [[en:dev:ota|facility to update over BLE]].+If you need to test an experimental firmware or update outside the official CRUMPET app, there is a facility to update over BLE. 
 + 
 +  * [[en:dev:ota|BLE_OTA_Python script]] 
 +  * [[https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/ota.html|API Reference: Over The Air Updates (OTA)]]
  
 **Note:** flashing test firmware or the incorrect firmware for your product can make it impossible to recover without a hardware flash, which may require return for service. You should only perform this operation **at your own risk**, and only if you are comfortable with all the steps and components used to perform it. You also need to have a recovery plan and be prepared to hardware flash if something goes wrong. **Note:** flashing test firmware or the incorrect firmware for your product can make it impossible to recover without a hardware flash, which may require return for service. You should only perform this operation **at your own risk**, and only if you are comfortable with all the steps and components used to perform it. You also need to have a recovery plan and be prepared to hardware flash if something goes wrong.
Line 35: Line 49:
 {{ :en:esp32_uart0_connections.jpg?direct&400 |ESP32 UART0 Connections}} {{ :en:esp32_uart0_connections.jpg?direct&400 |ESP32 UART0 Connections}}
  
-**Note:*** USB to TTL interfaces are available with 5 V, 3.3 V, or selectable voltage. The ESP32 //must// be used with 3.3 V interfaces //only//! Ensure that your cable or device is configured for 3.3 V before connecting it to the controller board, or your ESP32 may be permanently damaged.+**Note:** USB to TTL interfaces are available with 5 V, 3.3 V, or selectable voltage. The ESP32 //must// be used with 3.3 V interfaces //only//! Ensure that your cable or device is configured for 3.3 V before connecting it to the controller board, or your ESP32 may be permanently damaged.
  
  
Back to top